Campbell / Chimney & Fireplace
The fireplace at home.
The details around it.
Find guidance for firebox cleaning, damper repairs and fireplace components. Bring the equipment information you already have and describe the concern for the assessment.
Your home. Our starting point.
CARE FOR EVERY CORNER
Explore the work we can help you understand.
A LITTLE UNDERSTANDING HELPS
Behind the everyday.
A clearer path from hearth to sky.
Define the visit
Identify the fireplace or appliance and any previous inspection findings. Confirm which flue and areas are included.
Protect and clean
Discuss room protection, dust containment and access. Ask which cleaning methods are suitable for the particular system.
Review the findings
Request an explanation of observed conditions and any limitations. Sweeping does not itself repair a damaged liner, crown or flashing.
Around your home
Familiar spaces. Thoughtful care.
Illustrative service photography; not a portfolio of completed customer jobs.
FIND YOUR KIND OF HELP
A closer look at the services.
Inspection & Cleaning
Level 1 Chimney Inspection
You need a routine visual inspection before use or maintenance.
Explore the service →Chimney Repair & Weatherproofing
Chimney Cap Installation & Replacement
A cap is missing, damaged, loose, or no longer keeps rain and wildlife out.
Explore the service →Venting & Safety
Chimney Liner Inspection
An inspection needs to confirm the visible condition and continuity of a flue liner.
Explore the service →Fireplace, Insert & Stove Work
Firebox Repair
Brick, mortar, or interior firebox surfaces are cracked, loose, or visibly deteriorating.
Explore the service →
Inspection & Cleaning
Level 2 Chimney Inspection
A sale, damage event, equipment change, or operating concern needs a detailed review.
Explore the service →
Chimney Repair & Weatherproofing
Chimney Crown Repair
The crown is cracked, spalled, or holding water around the flue opening.
Explore the service →
Venting & Safety
Chimney Relining
A liner is damaged, unsuitable, or requires replacement after a documented inspection.
Explore the service →
Fireplace, Insert & Stove Work
Fireplace Refractory Panel Repair
A factory-built fireplace has a cracked or damaged refractory panel.
Explore the service →EXPLORE THE AREA
Campbell
Loads Google Maps when selected.
Place reference only. Confirm service availability for your exact address.
AROUND YOUR NEIGHBORHOOD
Start close to home.
Choose your area to explore the service options. Confirm your exact address and availability when you call.
Local exposure
Santa Clara County sits inside the Bay Area Air Quality Management District, whose Regulation 6 Rule 3 governs wood burning. The District’s own FAQ describes winter months starting 1 November through the end of February, and says Winter Spare the Air Alerts are issued when pollution reaches unhealthy levels — roughly 20 days each winter, when burning is not allowed. It also states that excessive smoke is not allowed beyond a 20-minute start-up period, and describes a Sole Source of Heat exemption for households whose only heat is a registered EPA-certified device. Check the alert status before you light a fire. This District FAQ was last updated in October 2017; confirm the current rule and alert status with the District.
Read the local reference ↗Planning your work
The Bay Area Air Quality Management District publishes what may be installed when hearth work is done. It states that no wood-burning devices of any kind may be installed in new homes or buildings being constructed in the Bay Area, and describes a chimney or fireplace remodelling project costing over $15,000 that requires a building permit as limited to a gas-fuelled, electric or EPA-certified device. The District also says wood burning is banned throughout the year when a Spare the Air Alert is called. Discuss the proposed appliance and the permit path with both the City of Campbell and the District before ordering anything. This is an air-district reference; it does not decide what your property needs.
Read the local reference ↗Local context
The US Environmental Protection Agency’s Burn Wise pages say fire officials recommend getting a wood-burning appliance, chimney and vent professionally inspected each year to keep them in safe working order, and the US Fire Administration likewise says to have chimneys and vents cleaned and inspected at least once a year. Ask what an inspection will actually look at and what you receive in writing afterwards. Annual guidance is not a finding about the condition of your own chimney.
Read the local reference ↗GOOD TO KNOW
Small details. Better decisions.
BEFORE THE VISIT
Choose the right service
Discuss an inspection and cleaning if needed. Inspection establishes the condition; cleaning addresses deposits.
Read the guide →BEFORE THE VISIT
Prepare for the visit
What fireplace or appliance is connected? When was the last inspection or sweep? Have there been changes, smoke issues or water entry?
Read the guide →BEFORE THE VISIT
Understand your quote
Separate inspection, cleaning, component repair and installation when comparing proposals. Identify the chimney and connected appliances involved.
Read the guide →LET’S CLEAR A FEW THINGS UP
Your questions belong here.
How is an inspection different from chimney sweeping?
An inspection assesses accessible components and documents findings; sweeping removes deposits within the agreed scope. One does not automatically replace the other. Ask which inspection is proposed, what can be accessed, whether cleaning is included and what written findings you will receive.
What information helps plan a chimney visit?
Describe the fireplace or appliance, its fuel type, recent use and any changes you have noticed. Mention previous repairs, water entry or a planned appliance change. Gather available service records and explain access restrictions. These details help define the visit without assuming what the chimney needs.
Can a chimney cap solve a water-entry problem?
A cap is one possible part of the assessment. Water may also enter around flashing, masonry joints or the crown. Ask what evidence supports the proposed repair and which area it addresses. A clear scope distinguishes a cap replacement from work elsewhere on the chimney.
What should an inspection report explain?
Ask for the areas examined, access limitations, photographs of relevant findings and the recommended next steps. The report should distinguish observed conditions from areas that were not visible. Use those findings to discuss repair options rather than treating a general service description as a diagnosis of your property.
How should I compare masonry repair proposals?
Compare the exact area and type of work: mortar joints, crown, flashing, liner or other components are different scopes. Ask about preparation, materials, access equipment and cleanup. If a proposal changes after inspection, request the reason and revised scope before agreeing.
EXPLORE THE PHOTOGRAPHS
Photo gallery
Chimney or fireplace?
Tell us what you need looked at and we will call you back.